3
HG-3 FLUSHING SYSTEM
Programming Unit
PROGRAMMING HYDRO-GUARD UNIT FOR OPERATION
be enabled in order for the App to
connect to the BL-KR device.
3.
Launch the application on
your Smartphone or Tablet.
4.
Associate the controller with
your phone by tapping the Add a
Controller button.
5.
The app will now ask what type
of Bluetooth device you would like to
add:
NOTE: The BL-KR V1.0 and BL-KR
V2.0 have identical hardware and
software configurations. The only
distinction is the outside plastic
housing.
6.
The App will now search for
devices in range.
7.
Choose the Controller.
The
serial numbers that populate
the device list can be found on
the label located on the back of
the controller housing with the
designation “Default name.” The
App will indicate that it is in the
process of connecting.
8.
Once the device is connected, it
HG-3 (Requires Bluetooth
Controller)
The BL-KR battery powered
irrigation module communicates
with the K-Rain BL Application on
a Smartphone or Tablet by using
Bluetooth SMART 4.0, (low energy)
on an iPhone with iOS version 7
minimum or an Android phone/
tablet with Marshmallow version 6.0
or higher.
Important
CAUTION: For use only with
9V DC Latching Solenoids. As
some solenoids will come from
the manufacturer with the plunger
already magnetically latched open,
some zones will default to OPEN.
Follow the start-up procedure
for systems with DC Latching
Solenoids. (Page 09)
CAUTION: For every change
to the program in the Mobile App,
you must exit back to the home
screen and tap the blue TRANSMIT
button (bottom right corner). The
Application aggregates changes
and transmits them to the
controller when you have finished
programming.
CAUTION: Programs A, B,
and C are independent programs,
including start times, run times,
watering days, and water budget.
1. Install the App:
– From the App
Store or Google Play Install
the free K-RainBL App:
2. Install a 9 Volt Battery in the
Controller:
– Unscrew the cap,
remove the seal and fasten the
battery to the correct terminals.
Replace the seal and cap and hand-
tighten the cap to ensure it seals.
NOTE: Before you launch the App,
you will need to enable locations
services on your phone/tablet in
order for the App to geolocate
your device during installation. On
Android, location services must
will appear on the home screen when
you launch the Application.
NOTE: You can associate up to 400
devices with the K-Rain BL-KR App.
The number of devices is limited
to the internal memory on the
Smartphone/Tablet.
!
!
!
To add
another
controller, tap
the plus sign
in the upper
right hand
corner of the
home screen.
Application Home Screen:
Device Home Screen:
