To light the surface burners, push and turn the corre-
sponding Burner Control Knob
counterclockwise
to
the
‘IGNITE’
position. You will hear a clicking noise –
the sound of the electric spark igniting the burner.
IMPORTANT: When one burner is turned to the
‘IGNITE’ position, all the burners will spark. Do not
touch any burner cap, burner base, or igniter while the
igniters are sparking. Do not attempt to disassemble
or clean around any burner while another burner is on.
2
3
●
If the flame goes out prematurely while trying to ignite, turn the Burner Control
Knob clockwise to the off position. Wait at least 5 minutes for any gas to dissipate
before attempting to reignite. You may have to keep the Burner Control Knob pressed
a little longer.
●
The Range has an
Auto-Reignition feature
to accommodate for situations where
the flame goes out due to external causes such as a draft or door slamming. The
burners will automatically spark to reignite the flame, preventing gas leaking inadver-
tently.
IMPORTANT:
The appliance can be damaged if you:
- turn the knob without pushing in
- turn clockwise to turn on
- turn counterclockwise to turn off
TURNING ON IN THE EVENT OF A POWER FAILURE
If there is a power loss, you can ignite the flame manually, e.g., with a utility lighter.
1. Push in the Burner Control Knob and turn counterclockwise to the ‘IGNITE’ posi-
tion.
2. Keep the Knob pushed in and ignite the escaping gas-air mixture with a utility
lighter (that is a minimum 6” in length).
3. When lit, keep pushed in and turn the knob to the desired setting.
IMPORTANT: If the flame is blown out during a power failure, turn the knob immedi-
ately to off, as the burner will not automatically relight and gas may escape.
When a flame is visible, keep the Burner Control Knob
pressed and continue to turn the knob
counterclock-
wise
to adjust the flame size. If the knob stays at
‘IGNITE’, it will continue to click.
The burner can be continuously regulated between
highest and lowest flame.
Note: The outer flame of the Double Burner will go out
when the Burner Knob is rotated to simmer (SIM).
Rotate clockwise to re-ignite the outer flame.
To turn
OFF
, turn the Burner Control Knob
clockwise
back to the dot/off position. The gas supply will stop
and the flame will go out.
OFF
22
