Revive M2 Model 760R
Mueller Sports Medicine
User Manual
L98107R0-G
7
6. Components of the Revive M2 System
The Revive M2 Console
(See Figure 2)
The console takes air from the room environment and sends it to individual air
chambers in the garment(s).
The Revive M2 Console is powered by either a DC power adapter or by a
rechargeable battery inside the console. The battery can be charged while the
console is plugged in and operating.
Note:
•
Turn
On
the
Power Switch
to enable charging the battery.
•
Turn
Off
the
Power Switch
to conserve battery power when not
charging or not using the console.
The following table illustrates the battery power capacity displayed by the
battery status indicators.
Battery Status Displayed Icon Available Power
Constant bars
100%
Constant bars
75%
Constant bars
50%
Constant bar
25%
Blinking bar
Almost empty
No bars
Empty
Blocker Plug
(See Figure 3)
If you use only one garment, insert this plug into the unused air outlet on the
front of the Revive M2 Console, to seal it and prevent air from escaping.
DC Power Adapter
(See Figure 4)
The DC Power Adapter receives 100-240 VAC, 50-60 Hz AC power and
supplies 12 VDC 3A to the console.
Caution:
•
For indoor use only.
•
Use only the DC power adapter provided with the console.
