background image

Revive M2 Model 760R 

Mueller Sports Medicine 

User Manual 

12 

L98107R0-G 

Step 2: Prepare for Treatment

 

  Always wear light clothing underneath the garment, for hygienic reasons, to 

avoid irritation and to absorb perspiration. 

  Do not wear the garment directly over bare skin. 

  Make sure clothing is unrestrictive, absorbent, and free of zippers, buttons, 

or other items that can rub and chafe under the treatment. 

  We recommend wearing cotton clothes, such as sweatpants or leggings along 

with cotton socks underneath the Revive Full Leg Boot and Revive Calf Boot, 
and a long sleeve T-shirt under the Revive Arm Sleeve. 

  Remove any jewelry or wristwatches, etc. that would be covered by the garment. 

Step 3: Put on the Garment

 

 

 

 

Caution: 

  Do not inflate the garment without wearing it over the intended body area  

("on empty") or with open zippers. Doing so can damage the garment. 

  Do not apply excessive force to the garment straps. Do not use the straps for 

any purpose other than intended by the manufacturer.  
Use of excessive force and/or misuse shall void the manufacturer's warranty. 

Revive Full Leg Boot and Revive Calf Boot Garments

 

a. Zip the garment closed at least part of the way up before inserting your leg. 
b. Insert your foot into the garment (see Figure 10). Pull the top of the garment 

towards your torso, extending the garment to its maximum length. 

c.  Close the zipper all the way up. 
d. Repeat for other leg, if desired.  
Revive Full Leg Boot and Revive Calf Boot garments are designed to fit on 
either the right or left leg. 

 

 

 

Caution: 

Do not stand or walk while wearing the garment! 
Put on the garment while in a seated position and remove it before rising 
from the treatment position. 

 

Figure 10 - Putting on the Revive Full Leg Boot or Revive Calf Boot 

Содержание 760R




























Отзывы: