Mueller
®
H-607 Power Operator
(Parker Motor)
Be sure to read and understand the
operating instructions for the Mueller
Drilling Machine used in conjunction with
the H-607 Power Operator.
To connect the H-607 Power Operator to
the Mueller Drilling Machine:
1. When using the CL-12 machine,
loosen the thumb screw holding the
lifting yoke and pivot in place. Remove
these parts for future use.
When using the C1-36 machine, loosen
the thumb screw on the pivot base
attached to the front bearing plate of the
drilling machine. Remove pivot and keep
for future use.
2. Position the H-607 Power Operator
over the pivot base and install the pivot
pin supplied with the H-607 Power
Operator.
3. Tighten the thumb screw to retain
the pivot pin.
4. Connect the H-607 Power Operator
to the hydraulic system, observing the
precautions provided on the previous
page.
The H-607 Power Operator MUST be
connected correctly to the hydraulic
system for the motor to turn in the
correct direction, and to prevent
possible equipment damage to the
motor or cutter, or severe personal
injury. The correct rotation is to drive
the machine spindle clockwise.
5. Turn on the hydraulic system and
momentarily activate the valve on the
H-607 Power Operator to allow the
motor drive square to align with the
square on the machine drive spindle.
The motor should drop into place.
6. Swing the eyebolt on the Drilling
Machine up between the ears on the
base of the H-607 Power Operator
– the washer should be on top of the
ears. Tighten the wing nut.
The directional control valve on the
H-607 Power Operator is detented,
and will remain in the ON position
when the valve lever is moved to the
ON position.
NOTE: Drilling machine must come
to a complete stop before reversing
direction of rotation. Failure to come
to a complete stop may damage
motor and/or machine and void
warranty.
OPeratiOn inStruCtiOnS
Copyright © 2017 Mueller Co., LLC. All Rights Reserved.
The trademarks, logos and service marks displayed in this document herein are the property of Mueller Co., LLC, its affiliates or other third parties. Products marked with
a section symbol ( § ) are subject to patents or patent applications. For details, visit www.mwppat.com. These products are intended for use in potable water applications.
Please contact your Mueller Sales or Customer Service Representative concerning any other application(s).
Reliable Connections
TM
Form 11903 – 06/17
