background image

Mueller

®

 H-607 Power Operator 

(Parker Motor)

General

Read and understand operation instructions for this tool before using it. Use 

only parts approved by Mueller Co.

The H-607 Power Operator may be used to provide hydraulic power to drive 

Mueller

®

 CH-6, CL-12, and C1-36 Model #5 Large Drilling Machines.

o p e r a t i n g   i n s t r u c t i o n s

Reliable Connections

TM

Water (Canada)
1.705.719.9965
www.muellercanada.com
[email protected]

International
1.423.490.9555
www.mueller-international.com
[email protected]

         

Danger

1. Failure to use hydraulic hoses 

labeled and certified as non-

conductive when using hydraulic 

tools on or near electrical lines may 

result in death or serious injury. 
Before using hoses labeled and 

certified as non-conductive on 

or near electrical lines, be sure 

each hose is maintained as non-

conductive. each hose should be 

regularly tested for electrical current 

leakage in accordance with your 

safety department instructions.

2. a hydraulic leak or rupture may 

cause oil injection in the body or 

cause other severe personal injury.
a) Do not exceed specified flow and 

pressure for this tool. Excess flow 

or pressure may cause a leak or 

rupture.

b) Do not exceed rated working 

pressure of hydraulic hose used 

with this tool. excess pressure may 

cause a leak or rupture.

c) check hook, hose, couplers and 

connectors daily for leaks. Do 

not feel for leaks with your hands. 

contact with a leak may result in 

severe personal injury.

d) Do not lift or carry tool by the 

hose(s). Do not abuse hose. Do 

not use kinked, torn or damaged 

hose.

iMPOrtant

3. Make sure hydraulic hoses are 

properly connected to the tool before 

pressurizing system. reversing 

tool operation can result in severe 

personal injury and/or equipment 

damage.
4. Do not connect closed-center 

tools to open-center hydraulic 

systems. this may cause extreme 

system heat and/or severe personal 

injury. 
Do not connect open-center tools 

to closed-center hydraulic systems. 

May result in loss of other hydraulic 

functions powered by the same 

system and/or severe personal injury.
5. Bystanders may be injured in your 

work area. Keep bystanders clear of 

your work area.
6. Wear hearing, eye, foot, hand and 

head protection.

!

Water (U.S.)
1.800.423.1323
www.muellercompany.com
[email protected]

Gas (North America)
1.800.798.3131
www.muellergas.com
[email protected]

• 

Weight – 31 lbs. (14 kg)

• 

Length – 14” (36 cm)

• 

Width – 5” (13 cm)

• 

Height – 6” (20 cm)

SPeCiFiCatiOnS 

• 

Flow Range 7-9 gpm/ 26-34 lpm

• 

Motor Speed (without load) 

   61 rpm at 8 gpm

• 

Pressure 1500 psig (105 barg)

Отзывы: