attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
10
X-Support
B
B
B
B
X-Support
X-Support
X-Support
X-Support
Female Piece
C
X-Support
Male Piece
X-Support
Male Piece
X-Support
Male Piece
X-Support
Male Piece
X-Support
Male Piece
X-Support
Male Piece
X-Support
Female Piece
X-Support
Female Piece
X-Support
Male Piece
X-Support
Female Piece
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
stEP 16.
Attach the
female x-supports
by
securing two to each
top
leg
using (8) 5/16’’ X 1 1/2’’
hex bolts [C], (16) nylon
washers and (8) 5/16’’
nylock nuts. Then, insert
the
male x-supports
into
the
female x-supports
aligning holes. Secure
two
male x-supports
to
each bottom leg using (8)
5/16’’ X 1 1/2’’ hex bolts
[C], (16) nylon washers
and (8) 5/16’’ nylock nuts
(Fig. 15).
stEP 17.
Align the holes of each
crossed
x-support
and secure
together using (4) 1/4” x 2 1/4” hex
bolts [B], (8) nylon washers and (4)
1/4” nylock nuts (Fig. 16).
stEP 18. sEcurElY tIGHtEn all
nuts anD Bolts at tHIs tIME.
FIG. 15
FIG. 16
