2
Front Leg-Upper
Front Leg-Lower
A
G
G
A
D
C
C
C
F
D
A
Platform Support
Rear Leg
Upper
Rear
Brace
Delta
Bolt
Rear Leg-Lower
Platform Brace
Male
Platform Brace
Detent Button
Female
Platform Brace
MSB100 Ultra-Steady Bench
WARNING:
Do not use without
securing rear brace to the rear leg using
provided delta bolt. (see fig. 1) Keep
fingers away from pivot points between
back and front legs to prevent pinching.
Failure to follow these instructions may
result in serious injury!
Parts List (MSB100)
Part#
Description
Qty
UP17-0011 Shooting Platform
1
UP15-0351 Seat Cushion
1
UP18-0013 Seat Support
1
UP18-0014 Platform Support
1
UP18-0015 Front Leg-Lower
1
UP18-0016 Front Leg-Upper
1
UP18-0017 Rear Leg-Lower
1
UP18-0018 Rear Leg-Upper
1
UP18-0019 Rear Brace
1
UP18-0020 Male Platform Brace
1
UP18-0021 Female Platfrom Brace
1
UP10-0586 Gun Rest-Upper
1
UP10-0587 Gun Rest-Lower
1
Instruction Maunal
1
UP77-0019 [A] 1/4" x 1 1/2" Hex Bolt
7
UP77-0023 [B] 1/4" x 2" Hex Bolt
3
UP77-0039 [C] 5/16" x 1 3/4" Hex Bolt
4
UP77-0041 [D] 5/16" x 2" Hex Bolt
2
UP77-0047 [E] 5/16" x 2 3/4" Hex Bolt
1
UP77-0048 [F] 5/16" x 3" Hex Bolt
1
UP77-0209 [G] 5/16'' x 4 1/2'' Hex Bolt
2
UP77-0192 5/16'' x 3'' Delta Bolt
1
UP77-0029 5/16" Nylock Nut
10
UP77-0001 1/4" Nylock Nut
3
UP77-0030 Nylon Washer
35
UP77-0054 3/8" Wing Nut
1
UP77-0063 1/2" Wing Nut
1
Check to make sure you have all the required
parts and hardware. If you find damaged or
missing parts in a newly purchased product,
please return this product to the retailer for
replacement.
STEP 1.
Using (3) 1/4'’ x 1 1/2'’ hex bolts [A], (6) nylon washers and (3) 1/4'’ nylock nuts
attach the
front leg-lower piece
to the
front leg-upper piece
. Then, attach the assembled
front leg
to the
platform support
using (2) 5/16'’ x 2'’ hex bolts [D], (4) nylon washers
and (2) 5/16'’ nylock nuts.
STEP 2.
Using (2) 5/16'’ x 4 1/2'’ hex bolts [G], (4) nylon washers and (2) 5/16'’ nylock nuts
attach the
rear leg-lower piece
to the
rear leg-upper piece
. Then, attach the assembled
rear leg
to the
platform support
using (1) 5/16'’ x 3'’ hex bolt [F], (2) nylon washers and
(1) 5/16'’ nylock nut.
STEP 3.
Connect the
male platform brace
to the
female platform brace
. Then, attach the
assembled
platform brace
to the
front leg
and
rear leg
using (2) 5/16'’ x 1 3/4'’ hex bolts
[C], (6) nylon washers and (2) 5/16'’ nylock nuts.
STEP 4.
Using (1) 5/16'’ x 1 3/4'’ hex bolt [C], (2) nylon washers and (1) 5/16'’ nylock nut
secure the
rear brace
to
platform support
. Next, align holes in the
rear brace
and
rear
leg
using the
delta bolt
to secure.
