attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
8
Female
End
Top Ladder Section
Middle Ladder Section
Middle Ladder Section
Bottom Ladder Section
Support Bar
C
Male
End
C
C
)RRW3ODWIRUP
$UPUHVW
&RYHU
%DFNUHVW
6XSSRUW
$UPUHVW
)RDP
$UPUHVW&RYHU
$UPUHVW)RDP
6KRRWLQJ5DLO&RYHU
6KRRWLQJ5DLO)RDP
D
D
)RRW3ODWIRUP
$UPUHVW
&RYHU
%DFNUHVW
6XSSRUW
$UPUHVW
)RDP
$UPUHVW&RYHU
$UPUHVW)RDP
6KRRWLQJ5DLO&RYHU
6KRRWLQJ5DLO)RDP
D
D
%DFNUHVW
6XSSRUW
5LJKW
6KRRWLQJ
5DLO3LHFH
$UPUHVW
/HIW6KRRWLQJ
5DLO3LHFH
A
H
H
'HOWD1XW
'HOWD1XW
1\ORQ
6SDFHU
1\ORQ
6SDFHU
stEP 12.
Assemble adjustable support bar by sliding
Part a
into the
Part B
.
notE:
The 1/4” x 1 3/4” Hex Bolt [C] and a 1/4’’ wing nut will be
used to set the desired length of the adjustable support bar (Fig. 11).
stEP 13.
Attach support bar to ladder using remaining 1/4” x 1 3/4” Hex Bolt
[C] and 1/4’’ wing nut (Fig. 12).
notE:
These figures relate to Step 5 of the
Installation Instructions from page 10.
FIG. 8
FIG. 10
FIG. 12
Par
t B
(Ladder P
iece)
Par
t A
(Tree P
iece)
C
C
Top Ladder Section
Middle
Ladder Section
Rope
FIG. 11
stEP 8
. Connect the
left
and
right shooting rails
using
(1) 1/4’’ x 1 1/4’’ hex bolt [A] and (1) 1/4’’ wiz nut. Attach
the assembled
shooting rail
to the outside of the
armrests
using (2) 1/4’’ x 2 1/2’’ carriage bolts [H], (2) 3/8’’
nylon spacers and (2) 1/4’’ delta nuts to secure (Fig. 8).
stEP 9.
Attach the
backrest support
to the
rear of the
foot platform
using (2) 1/4’’ x 2’’ hex
bolts [D], (4) nylon washers and (2) 1/4’’ nylock
nuts (Fig. 9).
stEP 10. sEcurElY
tIGHtEn EVErY nut anD
Bolt at tHIs tIME.
stEP 11.
Attach the
shooting rail foam &
cover
to the
shooting
rail
and
armrest foam &
covers
to the
armrests
.
Insert the
accessory
hooks
and
drink holder
in
desired locations
(Fig. 10).
WARNING! A footrest, armrests, rear
frame support and shooting rail have been
provided for support/and or comfort and is not
designed to carry the full weight of the user.
Never place more than 15 lbs (7 kg) on these
structures. Failure to follow these instructions
may result in serious injury or death!
FIG. 9
