2
WARNING!
DO NOT
over tighten the hardware. Over tightening can lead to structural damage and may negatively affect the
performance of your blind. Failure to follow these instructions may result in serious injury or death!
NOTE:
All Steps require that you temporarily finger tighten all nuts and bolts until instructed to tighten. This will ensure proper alignment during assembly.
Most parts of this model are manufactured to be universal in use, so there may be some parts containing holes that will not be used for assembly. To
minimize confusion in the assembly process, please read these instructions in entirety before beginning.
ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
STEP 1.
Attach the (2)
end frame base male pieces
to the (2)
end
frame base female pieces
using (2) 5mm x 1’’ hex bolts [A] and (2)
5mm nylock nuts.
Note:
Only one shown here.
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
End Frame Male Piece
End Frame Female Piece
A
End Frame Hoop
End Frame Hoop
End Frame Hoop
End Frame Hoop
End Frame Base
STEP 2.
Complete each end frame by
connecting (4)
end frame hoops
to each
assembled
end frame base.
Note:
Only
one shown here.
