ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM standard F2123 - Standard Practice for Treestand Instructions.
12
STEP 12.
At this time erect your Muddy tower kit at the desired location, ensuring that it is level and stable.
NOTE:
Leveling of the tower
kit may require removal of dirt below one or more of the leg supports.
STEP 13.
Anchor the Muddy tower kit according to the tie down anchor instructions found on page 18.
STEP 14.
Assemble the ladder by
connecting the
ladder sections,
ladder splices, ladder connectors,
ladder supports
and
ladder rail
using (12) 3/8’’ x 1 1/4’’ [A] hex bolts,
(2) 3/8’’ x 2’’ [B] hex bolts, (28) 3/8’’
steel washers, (14) 3/8’’ lock washers
& (14) 3/8’’ hex nuts; Securely Tighten.
NOTE:
The
ladder rail
can be attached
to either side of the ladder.
Ladder
Section
Splice
Ladder
Section
Splice
Ladder
Section
Ladder
Section
Ladder
Support
Bottom
Ladder
Section
A
A
Ladder
Support
Ladder
Rail
Ladder
Connector
Ladder
Connector
A
A
A
B
Ladder
Section
Ladder
Rail
A
A
A
A
A
A
A
B
Ladder
Section
Splice
Ladder
Section
Splice
Ladder
Section
Ladder
Section
Ladder
Support
Bottom
Ladder
Section
A
A
Ladder
Support
Ladder
Rail
Ladder
Connector
Ladder
Connector
A
A
A
B
Ladder
Section
Ladder
Rail
A
A
A
A
A
A
A
B
Ladder
Section
Splice
Ladder
Section
Splice
Ladder
Section
Ladder
Section
Ladder
Support
Bottom
Ladder
Section
A
A
Ladder
Support
Ladder
Rail
Ladder
Connector
Ladder
Connector
A
A
A
B
Ladder
Section
Ladder
Rail
A
A
A
A
A
A
A
B
FIG. 8
