manualshive.com logo in svg

Muddy BBT500, Инструкция по эксплуатации

Поделиться
Скачать
Muddy BBT500 Скачать руководство пользователя страница 1

INSTRUCTION MANUAL

ATTENTION!!

WHEN YOU SEE A “  WARNING!” BE SURE TO HEED THE MESSAGE! 

THE INFORMATION CONTAINED IN THESE MESSAGES 

CAN SAVE YOUR LIFE!!

PLEASE NOTE THAT

 

 

WARNING! 

statements have been placed throughout this Instruction Manual. These 

statements point out important safety information and instructions, which, if not followed could endanger the 
personal safety and/or property of the operator. It is imperative that the operator of this product, or any other 
product(s) read and follow all the instructions and warnings contained in this Manual prior to attempting to use 
this product(s), or any other product(s). Failure to comply with these instructions and/or warnings may result in 
serious personal injury or death!

January 2018. Published by Premier Outdoor Equipment, LLC, Windom, Minnesota.

© 2018 Premier Outdoor Equipment, LLC All rights reserved.

This instruction manual complies with the ASTM standard F2123 - Standard Practice for Treestand Instructions.

PO Box 454  •  Windom, MN 56101  •  (844) 745-7723

www.GoMuddy.com

Please see extra packet contents for registration warranty 

form and additional important information.

Elite 5' Tower

Model BBT500

Elite 5' Tower 

Extension Kit

Model BBT510

Содержание BBT500





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды