Mud Buddy
2004
HyperDrive
Owner’s Manual
Thank you for purchasing the most advanced
mud motor in the world.
Assembly - Read the instructions inside before
installing your motor. Check the crate and engine for
damage. Call Mud Buddy and the shipping company
immediately if you find any damage or missing items.
Notice: Engine is shipped without oil. Fill before starting.
Check the oil with engine in level position. Use a good grade of
SAE 10W-30 oil. You may also use a synthetic blend oil.
Engines
Vanguard 29 and 31- takes up to 2 qt. (check after adding 1.5 qt.)
18-29 h.p. Kawi - takes up to 1.4 qt. (check after adding 1 qt.)
Your engine is equipped with a mercury safety switch which prevents the engine from being
started unless the propeller is raised and out of the water.
Kawasaki 29 EFI Notice: Fuel injection system. When new or when in storage for an extended
period, bleed the fuel line of air. Remove the fuel line above the fuel filter, turn the key on and
pump out 1/4 cup of fuel into a suitable container. Reassemble. The fuel filter may have a little
air inside, this is okay. If you run out of fuel the above procedure must be repeated.
Kawasaki Notice
