6.CTX-step warming
E4
2.CTX-2step
3.CTX-3step
You can warm your tires by 2 step in this mode. It is convenient when you apply two different kinds of tire additives on your tires.
# CTX-3step has one more warming step, all other functions are exactly the same as CTX-2step warming #
Set front and rear tires target temperature
20~80deg.C
:Determine first step warming time.
1/2
20
minutes
F:70.0 R:70.0
Start delay
Auto start timer
00:57
01
minutes
1/2 2/2 delay
1/2 2/2 Timeleft
00:27
01minutes
:Determine delay time
:change front or rear temperature.
2/2
10
minutes
F:60.0 R:60.0
:move to next set up
Set front and rear tires target temperature
20~80deg.C
:Determine second step warming time.
:change front or rear temperature.
:move to next set up
:move to next set up
:back to former set up
:back to former set up
:back to former set up
1/2 step warming
2/2 step warming
CTX 2step warming done
1/2 - 2/2 Delaying
:You can check current step
and elapsed time.
:Count down alarm sound
can be eliminated.
:skip count down.
or
:Set auto start timer
:You can check current step
and elapsed time.
:You can check temperature or
1/2-2/2 delay time.
:Quit from CTX warming.
:Skip delaying, move to 2/2 step
warming
FR:70.0 RR:70.0
FL:70.0
RL:70.0
FR:60.0 RR:60.0
FL:60.0
RL:60.0
CTX - 2step
Done 00:30
:Quit from CTX warming.
If you need extra hot warming for certain
track or weather conditions,
You can set 100deg.C by hit key once
more when you reach to 80deg.C
If you need extra hot warming for certain
track or weather conditions,
You can set 100deg.C by hit key once
more when you reach to 80deg.C
Low voltage
Over voltage
Supply volt is poor
Please check warmer connection
Input is poor, CHK input power
Short circuit or overload
Input voltage is lower than 7.2V
Input voltage is higher than 15V
Input volt is lower than Input alarm(Please see E3 "4.User set up mode")
Warmer connection is not properly connected or a wire disconnected or damaged.
Input power is not sufficient.
Short circuit may have occurred to your warmer's heating wire. Please send the product to MUCHMORE.
Messages on LCD display
CAUSE
Please send the product to MUCHMORE RACING (or their associated distributors) for repair service.
MCU ERROR CALL FOR SERVICE
