Muchmore cell master double accel MM-CTXDAB, Руководство пользователя

Страница: 5 / 32

LiPo, LiFe Mode is only suitable for charging and discharging Lithium batteries. Do not use this mode to other battery.
Actual battery during charging and discharging must match the reference. If not match the battery, also in case of
overcharging, over discharging, it has huge damage and risk battery explosion. Charging and discharging function is
only for LiPo, LiFe battery. Do not use the other type of batteries.
LiPo, LiFe Batteries charging and discharging
Select LiPo or LiFe and
press Enter button Connect the battery
And If you want to cell balance charge,
connect the Cell balancer too.
◈ Information of STEP 3 LCD
Charging Current
Battery Cells
Charge Mode
Charging Capacity
● Charging Mode
Normal
Storage
CEV
(Cut End Voltage)
Plan to storage LiPo, LiFe battery more than 2 weeks. We recommend this mode.
Over-discharged batteries cause damage. To avoid this, the initial voltage of the battery and keep the correct
voltage to detect the state of the mode is automatically charged and discharged.
Basic charging type of LiPo, LiFe battery. In normal we recommend this mode
CEV charger mode only for LiPo, LiFe, battery. This function makes voltage drop LiPo/4.20V, LiFe/3.60V during the race.
It maintains this voltage till you start to drive. LiPo, LiFe discharge rate form and the charging voltage depending on
a battery internal resistance value of the battery becomes lowered differently. CEV after charging mode, press the
button to set the termination voltage can be charged. The higher the value of the termination voltage, the voltage remains
high after charging completed.
*Use Each LiPo, LiFe pack in accordance with the appropriate CEV value after test.
- select menu 1 -
LiPo
◈ STEP 01 ◈
Set Charge and press button
Charge
1
Discharge
*LiPo*
◈ STEP 02 ◈
6.5A 2S(7.4V)
Normal
3000mA
◈ STEP 03 ◈
●
Capacity(mAh)
Setup limits value of charge capacity. When the charge capacity is reached the setup capacity (target capacity), charge will be terminate.
This is very useful for battery storage or prevent over charging. Basically set capacity value up to 10% higher than battery capacity
(ex : battery capacity is 4600, setup to 5100) OFF is turn off this function.
※
Press the button at least 2 seconds after setting all of the charge, it moves to Check Battery with informing battery check on a screen.
●
Battery Cell condition check
●
Charging information
EQU
USER 2S(7.4V)
2S(7.4V)
USER
Cell number and Voltage from actual user
If detecting voltage and actual voltage are same, press button, and start to charge
But, if the actual cell number is different from detected cell number, please adjust the cell number
in manual.
LiPo, LiFe Charge
Charging
current
Battery
cells
Charge
Mode
Charging
Capacity
EQU
USER
※
Mismatch cell number will cause battery or device damage, please use carefully.
EQU
Auto detect Cell number and Voltage (from Cell Master Double Accel IC)
LiPo
CHG
8.35V
8:11
6.0A
122mA
Battery type/
Cell num, Channel
Charging currents Charging voltage
Mode state Charging capacity Charging time
* Optional charging keys.
During the charge, press button shown 3 information on the screen.
If not press the button, it moves back to charging mode screen after 5 seconds.
1. Current capacity of each cell
2. Setting value capacity, CEV(Cell End Volt) value
3. EQU Temp(device temperature), BAT Temp(battery temperature)
: Set the charging current to charge the battery, enter the value of the amp.
LiPo, LiFe batteries are recommended to charge 1C normally. (3000mAh battery is 3.0A charge)
: Select the number of charge the battery pack, specify the number of cells.
If you change the number of cells in the pack voltage will be displayed automatically.
: There are three modes in LiPo, LiFe charging. Select the desired charge mode by buttons.
: limit capacity of charging. Function of Limit the charging capacity, also it can be turned off.
4 Muchmore Racing Co., Ltd. SUPER COMPACT DUAL PORT CHARGER/DISCHARGER