MTX THUNDER FORM F250X00BK20A-TN, Руководство пользователя

Страница: 4 / 12

M T X . C O M
4
INSTALLATION
Step 1 - Slide front seats to full forward position and fold up rear seats. This will give you more room
to work with.
Step 2 -
Remove jack tools from floor and set them aside (you will reinstall them later in Step 23). The
jack does not need to be removed and stays in factory location.
Step 3 - You may want someone to help you for this step. Lift enclosure into your truck and place it on
the floor behind the front seats with the woofers facing up.
Step 4 -
If externally amplified, make speaker connections to the enclosure from the amplifier.
Connect speaker wires from amplifier to enclosure, positive to red terminal and negative to black
terminal.
Amplified ThunderForm
Note:
When routing power wire we recommend a connection directly to the battery.
Step 5 - Remove driver side and passenger side threshold trim; pull up on trim, it will remove easily.
Step 6 - Using furnished wiring harness route 10ga red power wire starting at pre-amp location.
Route wire on driver’s side, over to threshold and under carpet to the front of vehicle.