M T X . C O M
10
Step 16 - Now that the enclosure is securely tightened in place, the power and signal wires need to
be connected to the battery and signal source.
• The Red wire should be connected directly to the battery’s positive terminal and fused with a
20A fuse.
• The Black wire should be directly connected to the battery’s negative terminal.
•
If your vehicle is equipped with the Polaris
®
buss bar kit, the Red and Black wires can be
connected to the buss bar under the hood on the firewall. The Red wire will still need to be
fused.
• The Blue wire can be connected to the ACC / Key Turn On located on the buss bar of any vehicle.
Step 17 - Connect the RCA inputs to the signal source of your choice
Step 18 - Turn the unit on and check to make sure everything works. Set the gain using the gain pot
that is attached to the orange / grey wires. Set the gain to the bass level desired.
Step 19 - The included EBC can be connected and mounted to a desired location to allow easy trim
adjustment of the bass level after the gain has been set.
Step 20 - Replace all the parts and screws that have been removed to return the RZR back to its
completely assembled state.
