EXPLANATION OF FEATURES AND CONTROLS
Refer to Figure A
1) Power Switch: This two position switch controls the power status of the sub-
woofer.
Off: Turns the unit off.
On: Turns the unit on regardless of whether a signal is present or not.
2) Subwoofer crossover (Freq): This rotary control adjusts a variable low pass fil-
ter to set the upper frequency at which the output of the subwoofer begins to roll-
off. Continuously variable from 50Hz to 150 Hz, it matches the upper frequency
characteristics of the subwoofer to the low frequency response of the main stereo
speakers.
Recommended setting: 120Hz-150Hz.
3) Line level input: These RCA phono jacks accept a line level full range signal
from the preamplifier output of a receiver or preamplifier. This full range signal is
processed and amplified to power the subwoofer.
4) Speaker level (high level) input: These spring loaded terminals for speaker wire
accept a stereo, speaker level, full range signal from a receiver or power amplifier.
This signal is processed and amplified to power the subwoofer.
5) Fuse: For continued protection replace fuse with same type and size listed.
6) Level control (Gain): This rotary control adjusts the level of the subwoofer and
is used to balance its volume with that of the main stereo speakers.
7) Status LED: This light emitting diode shows the status of the subwoofer elec-
tronics. "Red" indicates that the amplifier is plugged in and the power switch is
on.
WIRING AND CONNECTIONS
Turn off all power to your subwoofer and other equipment before making
any connections.
Installation using speaker level inputs (Figure B).
FIGURE B
FRONT
CENTER
SURROUND
A/V Receiver or Amplifier
LEFT
REAR
RIGHT
REAR
CENTER
FRONT
+
-
+-
+-
HI LEVEL IN
R
L
L
R
LINE IN
MIN MAX 50Hz 150Hz
POWER
ON
OFF
FUSE 1A/250V
Made In China
GAIN
FREQ
FROM AMPLIFIER
120 VAC
100 WATTS
60 HZ
LEFT
FRONT
+ -
RIGHT
FRONT
+ -
1A 250V
Installation with A/V amplifiers and receivers that have 5.1 channel line level
output (Figure C).
Use an RCA "Y" adaptor to connect both line level inputs.
HI LEVEL IN
R
L
L
R
LINE IN
MIN MAX 50Hz 150Hz
POWER
ON
OFF
FUSE 1A/250V
Made In China
GAIN
FREQ
FROM AMPLIFIER
120 VAC
100 WATTS
60 HZ
5
1
6
2
7
4
3
FIGURE A
1A 250V
FIGURE C
FRONT
CENTER
SURROUND
A/V Receiver or Amplifier
RIGHT
FRONT
LEFT
FRONT
LEFT
REAR
RIGHT
REAR
CENTER
FRONT
+ -
+ -
+
-
+-
+-
OUTPUTS
SUB
HI LEVEL IN
R
L
L
R
LINE IN
MIN MAX 50Hz 150Hz
POWER
ON
OFF
FUSE 1A/250V
Made In China
GAIN
FREQ
FROM AMPLIFIER
120 VAC
100 WATTS
60 HZ
1A 250V
