background image

38

MTX-GTW II | 2017/12

MTX © by MATRIX ELECTRONICA S.L.U.

mtxm2m.com | [email protected]

SAFETY REQUIREMENTS AND PROTECTION 

REGULATIONS

Please read the information in this section before starting your integration work!

1. Safety Instructions

PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM.

•  Always ensure that use of the modem is permitted. The modem may present a hazard if used 

in proximity to personal electronic medical devices. As a rule, the modem must not be used in 

hospitals, airports or planes.

•  Never use the device at a gas station, refuelling point, blasting area or in any other environment 

where explosives may be present.

•  Operating the device close to other electronic devices, such as antennas, television sets, and 

radios may cause electromagnetic interference.

•  This product is intended to be used with the antenna or other radiating element at least 20cm 

away from any part of the human body. In applications where this rule cannot be applied, 

the application designer is responsible for providing the SAR measurement test report and 

declaration.

•  You are responsible for observing your country’s safety standards, and where applicable, the 

relevant wiring rules.

Содержание MTX-GTW II






























































Отзывы: