3. Install the recorder:
Fixed it on the original rearview mirror.
4. Connecting the power:
Plug the car charger into the car cigarette
lighter. And then connect the recorder’s USB and car charger by the
extension charging cable.
5. Checking:
To launch the engine and check if the recorder installed
correctly.
Function Instruction
1. Automatic recording function
To start the engine, the recorder will automatically start to recording with
the video light blinking.
After the car flameout, the equipment can
preserve the record and power off in 15S automatically. The segmented
video will be saved on the TF card. The earlier recording images will be
covered when the TF card is full.
2. Manual recording function
Long press the button 3S to open/close the recorder manually.
3. Photograph function
Short press the button to enter the photo mode, the icon on the left
corner of the screen is converted from camera to photo icon. Short press
“OK” button can be photographed, the screen will flashing when taking
pictures.
4. Motion Detection
Long press the button “ ” into motion detection. And then short press
“OK” button to start the recording. It will switch into motion detection
Note: Charging cable can be laid along the edge of the windshield.
Note: When the machine is correctly installed, the system indicating lamp
lightens. The machine enter into recording status, video light is blinking.
Please check if the display on the screen is normal, if the display is a
reversed image, contact us please.
a. The recording time can be set in the Menu, the time range is
1/2/3/5/10 minutes separately.
b. If you choose recording time is close, it will not save the video after
the card is full.
