M T X . C O M
4
INSTALLATION
Step 1 - Place enclosure in passenger side of cargo area.
Step 2 - Make note of the terminal / pre-amp location and then move enclosure aside to route wires
to that location.
Step 3 - If externally amplified, connect speaker wires from amplifier to enclosure, positive to red
terminal and negative to black terminal.
Step 4 - If you are using an external amplifier, skip to step 20.
Amplified ThunderForm
Note:
When routing power wire we recommend a connection directly to the battery.
Step 5 - Remove the rear seat bottom by pressing the cushion toward the rear of the car and lifting
up. It helps to do one side at a time. Starting at the rear of the vehicle, remove the plastic trim on
driver side.