6.13.5 Charge-air coolant – Draining
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Sealing ring
(→ Spare Parts Catalog)
Sealing ring
(→ Spare Parts Catalog)
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
Charge-air coolant – Draining
1.
Provide an appropriate container to drain the
coolant into.
2.
Turn breather valve on coolant expansion
tank counterclockwise to the first stop and
allow pressure to escape.
3.
Continue to turn breather valve counterclock-
wise and remove.
4.
Draw off precipitated corrosion inhibitor oil
from the expansion tank through filler neck.
5.
Open drain plugs and drain coolant at the fol-
lowing points:
• At the charge-air coolant pump;
• At the intercooler, engine driving end and
free end sides.
6.
Screw in drain plugs with new sealing rings.
7.
Place breather valve on filler neck and close.
MS150094/02E 2015-05
| Task Description | 125
TIM-ID: 0000000040 - 003
