manualshive.com logo in svg

MTU 12 V 4000 S83L, Руководство по эксплуатации

Поделиться
Скачать
MTU 12 V 4000 S83L Скачать руководство пользователя страница 108

7.15.6 Engine coolant – Sample extraction and analysis

Preconditions

☑

MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

MTU test kit

5605892099/00

1

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury – danger to life!
• Take special care when working on a running engine.

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.

WARNING

Engine noise above 85 dB (A).

Risk of damage to hearing!
• Wear ear protectors.

Engine coolant – Sample extrac-
tion and analysis

1.

With the engine running, open drain
valve (1).

2.

Flush sample-extraction point by draining
approx. 1 liter coolant.

3.

Drain approx. 1 liter coolant into a clean
container.

4.

Close drain valve (1).

5.

Using the equipment and chemicals of the
MTU test kit, check the coolant for:
• Antifreeze concentration
• Corrosion inhibitor concentration
• pH value.

6.

For engine coolant change intervals,
(→ MTU Fluids and Lubricants Specifica-
tions (A001061/..)).

108 | Task Description | MS150027/02E 2013-02

TIM-ID: 0000000938 - 007

Содержание 12 V 4000 S83L











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды