MTU 12 V 2000 S96 Скачать руководство пользователя

Страница: 43 / 133

6.2 Crankcase Breather

6.2.1 Crankcase breather – Oil mist fine separator replacement

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Engine oil
Oil mist fine separator

(→ Spare Parts Catalog)

O-ring

(→ Spare Parts Catalog)

WARNING

Hot oil.

Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.

• Avoid contact with skin.

• Do not inhale oil vapor.

Replacing oil mist fine separator

Loosen screws (1) and remove together

with retainer (2).

Replace oil mist fine separator (3).

Check O-ring (4), replace if necessary.

Replace further oil mist fine separators in

the same way.

MS150095/01E 2012-08 | Task Description | 43

TIM-ID: 0000018590 - 005

Содержание 12 V 2000 S96






































































































































Результаты поиска

Содержание 12 V 2000 S96

Отзывы:

Похожие инструкции для 12 V 2000 S96

Бренды по названию

Популярные бренды

MTU 12 V 2000 S96, Руководство по эксплуатации

Результаты поиска

Содержание 12 V 2000 S96

Отзывы:

Похожие инструкции для 12 V 2000 S96

Бренды по названию

Популярные бренды