High Pressure Housing
Operation Manual
I
4
I
1.
Open the housing by turning the top counter clockwise.
When opening after a sensor is installed, it is very
important to completely loosen the cable gland in
order to protect the cable against twisting and physical
damage. The normal way is that the sensor and the HPH
housing are in one order and then MTS Sensors supply
the sensor mounted in the WPH housing. Go to step 7.
2.
To simplify the connection, the basic sensor can be
pulled out of the HPH housing after loosening the two or
three fastening screws, depending on the configuration.
3.
Cable gland
3.1
Insert the cable through the gland
3.2
Insert the connector through the top.
3.4
Connect to the sensor and assemble the top and
bottom turning clockwise.
MOUNTING DISCRITPION