MTP 1750 Series, Руководство пользователя

Страница: 23 / 50

61301604063 3–1
Section 3 Operating Instructions
To fill cages, the dispenser is operated with a tunnel washer. As each cage
passes through the filling chamber, bedding is dispensed into it. Levels can
be adjusted by varying the speed of the dispenser drive. After the cages
exit the unit, they are manually unloaded from the unit.
This section has the following parts:
• PREPARING
• SETTING
• OPERATING
• EMERGENCIES
PREPARING
Daily Checklist
Before operating the bedding dispenser each day:
Danger of falling. The surrounding floor may be slippery with
spilled bedding. When around the bedding dispenser, walk
carefully to maintain balance and avoid injurious falls.
1. Check the hopper and refill it if necessary (see below,
Refilling The Hopper ).
2. Clean the door apron(s) with a damp cloth.
3. Clean the debris screen in the water collection area.
Compatible Bedding Types*
The bedding dispenser uses dry, chip type, free flowing, solid bedding.
Some examples are listed below:
WARNING
wood shavings hard wood chip soft wood chip
cob materials paper (chip type) pelletized
*Bedding types must be dry and free flowing.