MTN EAX1805, Руководство пользователя

Страница: 20 / 21

Frequently Asked Questions:
Why the connected node can not be managed:

Please confirm that the mobile wifi is connected to the SSID of the device to be
managed
How to restore the router to factory settings:

When the power is on, sting the repeater's "Reset" pinhole for 10 seconds to restore
the factory settings.
How to manage the node by using PC / laptop:

Step 1.Connect the PC / Laptop to the mesh repeater’s Wi-Fi or LAN port via ethernet
cable.

Step 2.Launch an Internet Browser(Chrome,Safari,etc.)and enter the repeater’s
domain name or IP Address.The default login information is available at the product
label.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by