MTI CONNECT™ HUB PRODUCT MANUAL
4
MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved
www.mtigs.com | T:800.426.6844
1
4
7
2
5
8
3
6
9
VERSA KE
Y
™
NETWORK PAIRING -
RFID ASSET PROTECTION
Ensure the Hub and all CX Flex
or Freedom Micro II positions
are powered up. Once powered,
the staus light will illuminate (see
page 3 for LED Status Indicators).
Remove the IntelliKey (blue LED
will stay flashing on Hub for up to
15 minutes).
After connecting to the network,
the LED indicator will flash white
slowly if disarmed or solid white if
armed.
Plug Connect IntelliKey into
the USB port on the top of the
Hub. When the IntelliKey LED
lights green, it has been added
to the system whitelist. Remove
and repeat for all other Connect
IntelliKeys.
Activate user keys in the MTI
Connect web portal. This function
is only available to Managers or
higher level personnel.
Touch an activated user key to the
device. A double beep indicates
that the key will now control the
device.
Plug in any Connect IntelliKey in
for 10 seconds. After 10 seconds,
the Hub status indicator will flash
blue, indicating the Hub is in
network pairing mode.
Touch the pairing card to the
RFID device. The LED indicator
will flash blue for up to 90
seconds.
System Status
Network
Power
Reset
stem Stat
System Status
Network
Power
Reset
tat
tat
m Sta
ta
atu
a
a
System Status
Network
Power
Reset
tat
tat
m Sta
ta
atu
a
a
NETW
ORK
PAIR
ING
