MTI MPA82000, Руководство пользователя

Страница: 4 / 12

MPA82000 Power Amplifier
Welcome
Thank-you for purchasing an MPA82000 Amplifier from MTI.
MTI is a Danish company with more than 30 years experience of designing and manufacturing for the
professional audio industry. The MPA82000 is one of many high-quality, state-of-the-art professional
audio products manufactured by MTI.
With a continuing quest for innovative technology and manufacturing techniques, MTI is committed to
producing products of the highest standards, superior performance and reliability.
The MPA82000 Amplifier
The MTI MPA82000 is a compact 19” high power amplifier housing:
•
Up to 8 x 500W or 1000W modules in any configuration *
•
Built in 8-channel DSP controller with full 8 x 8 signal routing matrix, EQ, Crossover, Delay,
Gain and Limiter functions
•
Global delay up to 1.6 seconds
•
16 user programmable present programmes
•
RS485 interface for controlling up to 16 amplifiers by one PC (up to 1200m/4000ft)
•
Balanced line input XLR connector panel
•
Neutrik Speakon Speaker connector panel
•
Only 3U high in an industry standard 19” width
•
26 Kg (58lbs).
*Standard configuration is 4 x 500 Watt and 4 x 1000 Watt modules. 1000 watt modules are bandwidth limited @ 3kHz -3dB.
Other configurations on request. Module 1 is to the left when the amp is viewed from the front.
The design of this amplifier is a culmination of over three decades of professional audio product
development by MTI. It features a very sophisticated construction, resulting in considerable advances
over traditional amplifier design. All circuit designs are based on extremely reliable and sophisticated
technology, insuring stability into "difficult" loads.
A single MPA82000 at just 3U high can typically replace a 12-16 unit amplifier rack. A built-in 8-
channel DSP controller provides a full 8x8 signal routing matrix, EQ, crossover, delay, limiter and gain
control, with global delay of up to 1.6 seconds. Settings can be stored in 16 user presets. The
MPA82000 can be remotely controlled via an RS485 interface with up to 16 MPA82000s running from
a single RS485 interface over a maximum distance of 1200m (4000ft).
Unpacking
All MTI products are fully tested and inspected before leaving the factory. After unpacking your
amplifier please inspect it for any physical damage. In the unlikely event of damage caused in transit
please contact your MTI dealer immediately so that a written claim for damages can be made. Please
retain the shipping carton and all packing materials in case the unit needs to be returned.
Page 4