MTI 550, Руководство пользователя

Страница: 37 / 40

MTI, Inc.
801-875-4999 • Fax 801-952-0548 • www.MTI.net
© MTI, Inc. All rights reserved. MTI reserves the right to make any product changes without notice.
130-2188 Rev A
In-service Form for G2 Products with SmartTech™ | MTI
Strength in patient care.
™
Sales Order/Invoice No.: Customer Name:
Address:
Phone: Fax: Email:
Model Number Description Serial Number(s)
The following in-service has been performed on my MTI product(s):
In-service training which meets our requirements for operation and use of above described equipment has
been provided by .
Saved Programmable Home
Saved (4) User Program Buttons (P1-P4) Reviewed Safety Lockout
Reviewed ADA Compliant Home
Reviewed Controls and Operation sections of
the User Manual
Customer Signature: Title: Date:
Customer Name: Email:
I would like to be contacted to give a testimonial on my MTI products.
Save by positioning chair to desired location. If buttons are
set to Momentary: press and hold the Home Button for 10
seconds. If buttons are set to Maintained: Press the Stop
button twice and then press and hold the Home Button for
10 seconds. Once saved, audible and visual confirmation
will be received.
ADA Compliant Home position is Lift Down, Tilt Down, Back
Up, and Foot Down and Retracted. To access: if buttons are
set to Momentary, press and release the Home Button twice
(within 1 second). If buttons are set to Maintained, press and
hold the Home Button twice (within 1 second).
Save by positioning chair to desired location, press and hold the
desired program button for 5 seconds. Once saved, audible and
visual confirmation will be received.
Locks out all commands once this state has been enabled. To
enter, press the following sequence of buttons: Stop, Stop,
Back Up, Stop. Once enabled, audible and visual confirmation
will be received.
To exit, press the following sequence of buttons: Stop, Stop,
Back Down, Stop. Once disabled, audible and visual confirma-
tion will be received.
Once complete, email to in-service@mti.net
Set Smart Controller™ Settings
Enter the User Program Mode in the Smart
Controller™ to change how the Program
Buttons and the swivel (if applicable) oper-
ate. See page “Smart Controller™ Technol-
ogy” in the User Manual.
Maintained Button Setting Momentary
[Factory default]
Momentary Program Buttons: press and release to automatically
move chair to the programmed position.
Maintained Program Buttons: press and hold to move chair to the programmed posi-
tion. Once button is released, chair will stop.
Lock/Unlock Swivel Setting
(if applicable)
Auto-Lock
[Factory default] Auto-Lock Swivel: pressing the Swivel Button will unlock the swivel.
Swivel will automatically lock after 30 seconds or pressing any button will lock the swivel.
Lock/Unlock Swivel: pressing Swivel Button once will unlock the swivel. The swivel will not
lock again until any button is pressed.
IN-SERVICE FORM