Figure 2: Adding Smoke Fluid
Figure 3: Smoke Unit Control
Priming the Smoke Unit
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (see Fig. 2). We recommend M.T.H. ProtoSmoke™ fluid. Do not overfill
the unit or the fluid may leak out and coat the interior engine components.
If you choose not to add smoke fluid (or have already added fluid but choose to run
smoke-free), turn off the smoke unit by turning the smoke unit volume control fully
counter-clockwise.
Failure either to add fluid to the smoke unit or to turn it off may
damage the smoke unit heating element and/or wicking material.
Running the engine
without a primed smoke
unit may cause damage
4
RailKing Baldwin AS616 Diesel Engine w/Proto-Sound 3.0
®
Add Smoke Fluid
Smoke Unit
Control
