MTHTrains PREMIER DC-3 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 49

background image

DC-3 Rail Inspection Car

17

Master Volume

F6 – Master Volume

There are 10 volume levels. Pressing F6 twice (toggling on then off) raises the Master

Volume one level. The Master Volume loops. That is, if you go past the 10th level it will

loop back around to the 1st or lowest volume level.

Couplers

Your MTH PS3.0-equipped engine comes with remotely controlled Proto-Couplers. They

can be fired using your DCC handheld.

F7 – Front Coupler

Pressing F7 twice (toggling on then off) will fire your Front Coupler

F8 – Rear Coupler

Pressing F8 twice (toggling on then off) will fire your Rear Coupler Forward/Reverse

Signal Just like a real engine, you can announce the direction of intended movement

using your DCC handheld and F9 and F10.

F9 – Forward Signal

Pressing F9 twice (toggling on then off) will sound the Forward Signal. This is two whis

-

tle/horn blasts

F10 – Reverse Signal

Pressing F10 twice (toggling on then off) will sound the Reverse Signal. This is three

whistle/horn blasts

Grade Crossing Signal

Again, just like a real engine, you can trigger the Grade Crossing Signal on your engine.

This is two long, one short, one long whistle/horn blast.

F11 – Grade Crossing Signal

Pressing F11 twice (toggling on then off) will sound your Crossing Signal. Smoke (if

Equipped)

F12 – Smoke On/Off

Enabling F12 will turn the smoke unit on. Disabling F12 will turn your smoke unit off.

F13 – Smoke Volume

There are three smoke volume levels in your MTH PS3.0-equipped engine – Low/Med/

High. The default for this is set to High. You can adjust the smoke output (amount of

smoke the generator puts out) by pressing the F13 button twice. This sets the level to

the next step. For example, if you are currently at the High smoke output level, pressing

F13 twice (toggling it on then off) will set the smoke volume to Low. Pressing F13 twice

again will set it to Medium and so on.

«
...
15
16
17
18
19
...
»

Содержание PREMIER DC-3


















































Отзывы:

Нет отзывов

Похожие инструкции для PREMIER DC-3

Бренд: Faller Страницы: 24

Бренд: Faller Страницы: 4

Бренд: VA Models Страницы: 8

BALANCE BIKE - GRANDE

Бренд: COCOVILLAGE Страницы: 3

Бренд: Eurocopter Страницы: 58

Climater 2,4 GHz

Бренд: Jamara Страницы: 12

3-IN-1 CLASSIC AMUSEMENT PARK

Бренд: K'Nex Страницы: 24

Fordhampton Garden center

Бренд: GAUGEMASTER Страницы: 4

Branchline Class 03

Бренд: Bachmann Страницы: 3

Weaver Nickel Plate Road L1a

Бренд: Quality Craft Страницы: 6

Бренд: The Wings Maker Страницы: 13

Avro Lancaster V3

Бренд: H-KING Страницы: 19

Бренд: VTech Страницы: 12

CHOU CHOU Magic Pacifier

Бренд: Zapf Creation Страницы: 5

Lancaster landing flaps

Бренд: Eduard Страницы: 2

RC Creatures Gorilla

Бренд: World Tech Toys Страницы: 4

Jones & Laughlin Steel Slag Train

Бренд: Lionel Страницы: 12

Бренд: PIKO Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды