I
NSTRUCTIONS
To replace the interior light bulbs, follow these steps. 1) To remove the shell from the chassis, remove the four mounting
screws located underneath the trucks. 2) With the four screws removed, lower the chassis from the shell, taking care not to
pull the wires out. 3)
With the
step platforms removed you can then lower the interior from the shell. 5) Replace the bulbs by pushing the socket up from
the bulb holder and pulling the bulb from its socket. Remove the vertical bulb simply by pulling it from its socket.
Remove the step platform from each end by pulling the platforms away from the ladders. 4)
Replace with a new bulb and reverse the
steps to reassemble the caboose, being careful not to scratch the paint as you fit the ladder back into the step platforms.
You can obtain replacement bulbs directly from the M.T.H. Parts Department (phone: 410-381-2580; e-mail: [email protected]; mail: 7020 Columbia
Gateway Drive, Columbia MD 21046-1532).
STEP
1
1
Remove these
four screws
STEP
2
2
STEP
3
3
STEP
4
4
STEP
5
5
STEP
STEP
STEP
STEP
1
2
3
3
STEP
4
STEP
5
Ladder
Step
Platform
Vertical Bulb
