21
MTH Big Boy Operating Manual
(See the section
Using RESET To Program ProtoSounds on page 18
).
Once in Feature 45, press the whistle button and wait for the module to
sound a bell ding(s). Continue pressing the whistle button until the module
plays back three dings for option 3 - Squeaking brakes OFF.. Press the
whistle button again until the module plays back one ding for option 1 -
Squeaking brakes activated by bell button. Once you have decided on the
desired setting, simply
turn the throttle off and
then on again to
“Lock-In” the new
setting. To reset the
computer to its original
factory default setting
(option 2 - squeaking
brakes on all the time,
repeat the above procedure but keep pushing the whistle button until the
module only responds with two bell dings.
PROGRAMMING FOR WHISTLE IN NEUTRAL
OPERATION
If you are operating your engine with a separate bell button and want to
blow your whistle when your engine is in neutral, you will need to program
ProtoSounds® to do so as the factory setting only allows the whistle to
blow in forward or reverse. To do this, enter RESET and go to Feature 25.
(See the section
Using RESET To Program ProtoSounds®
on page 18.)
Once in Feature 25, press the transformer whistle button and wait for
ProtoSounds® to sound a bell ding(s). Continue pressing the whistle button
until ProtoSounds® sounds two bell dings (signifying that ProtoSounds®
has been programmed to
sound the whistle in neutral).
Turn the throttle off and then
on again to “Lock-In" your
selection. Now, whenever
you are in neutral, you can
blow the whistle with the
transformer whistle button.
To reset ProtoSounds® to its
original factory setting of no
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
25 Times
Listen For 5 Clank
And 0 Clink Sounds
Push The Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Whistle Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
45 Times
Listen For 9 Clank
And 0 Clink Sounds
Push The Whistle Button
Until You Hear The
Appropriate # Of Dings
Interrupt The Throttle
To “Lock-In”
The Brake Setting
H
