SW-1 Diesel Engine with PS-2
17
FYS/PSA
Remedy
Once in FYS/PSA, the engine
doesn’t go into reverse.
When the FYS/PSA enters its last
sequence the bell automatically
comes on.
When FYS/PSA is enabled,
pressing the whistle and bell
buttons has no effect.
I push the direction button but the
next sound clip in the sequence
does not play or the engine does
not come out of FYS/PSA after
fourth press of the direction
button.
So that FYS/PSA effects can be as
realistic as possible, Proto-Sound
2.0 disables the reversing unit
whenever FYS/PSA is enabled.
This way the engine remains still
at its stop as the operator cycles
through the FYS/PSAsequences.
FYS/PSA is programmed to start
ringing the bell at that point. After
approximately 12 seconds it will
automatically turn off.
Because FYS/PSA must control
various effects in each sequence,
Proto-Sound 2.0 takes control of
these sound effects until you exit
Each FYS/PSA clip must play for
approx. 30 seconds before
FYS/PSA will advance to the next
step in the FYS/PSA cycle. Wait
at least 30 seconds in each
FYS/PSA sound clip before
pressing the direction button.
