DO NOT
OVER OIL
DO NOT
OVER OIL
Figure: Lubrication Points on the Locomotive
Before You Begin
By visiting the M.T.H. website, www.mthtrains.com, you will be able to view any
additional manual updates that affect your engine. Enter the MTH Item number of the
engine you want to check and select the manual icon to download or view it. You will
need Adobe Acrobat Reader to view the manual.
You can obtain replacement parts from MTH Parts & Sales, LLC.
Order online: www.mthpartsandsales.com
Set Up Checklist
• Lubricate Engine and Prime Smoke Unit
• Read all General Maintenance Instruction
• Apply power to run as described in the Modes of Operation section
Lubrication
You should lubricate the engine to prevent it from squeaking and
to prevent excessive wear. Use light household oil and follow the
lubrication points marked “L” (shown below). Do not over-oil.
Use only a drop or two on each pivot point.
Premier SD60M Diesel Engine
Priming the Smoke Unit
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (see the figure on the following page). We recommend M.T.H.
ProtoSmoke™ fluid. Do not overfill the unit or the fluid may leak out and coat the
interior engine components.
If you choose not to add smoke fluid (or have already added fluid but choose to run
smoke-free), turn off the smoke unit by turning the smoke unit volume control fully
counter-clockwise.
Failure either to add fluid to the smoke unit or to turn it off
may damage the smoke unit heating element and/or wicking material.
Lubricate Pick Up Roller Axles (L)
Lubricate All Wheel Axles (L)
3
*The figures in this manual are generic interpretations of what your engine will look
like. Wheel sets, switches, and details may be different for your model.
