RLW Reactor Users Manual
Data subject to change without notice 5-29-09 4 of 25
INSTR--30
2. INTRODUCTION
This manual was specifically developed to assist in the installation, interconnection and operation of
MTE Corporation Series RLW Line/Load Reactors
This manual is intended for use by personnel experienced in the operation and maintenance of electronic
drives, inverters and similar types of power electronic equipment. Because of the high voltages required by the
equipment connected to line/load reactors and the potential dangers presented by rotating machinery, it is
essential that all personnel involved in the operation and maintenance of line/load reactors know and practice
the necessary safety precautions for this type of equipment. Personnel should read and understand
the instructions contained in this manual before installing, operating or servicing line/load reactors and
the drive to which the reactor is connected.
Upon Receipt of a Reactor:
MTE Line/load Reactors have been subjected to demanding factory tests before shipment. Carefully
inspect the shipping container for damage that may have occurred in transit. Then unpack the filter and
carefully inspect for any signs of damage. Save the shipping container for future transport of the
reactor.
In the event of damage, please contact and file a claim with the freight carrier involved
immediately.
If the equipment is not going to be put into service upon receipt, cover and store the reactor in a clean, dry
location. After storage, ensure that the equipment is dry and that no condensation has accumulated on
the reactor before applying power.
Repair/Exchange Procedure
MTE Corporation requires a Returned Material Authorization Number before it can accept any reactors
that qualify for return or repair. If problems or questions arise during installation, setup, or operation of the filter,
please call us for assistance at:
Phone: 1-262-253-8200
FAX: 1-262-253-8222
