MTD WCM 84 E, Руководство пользователя

Страница: 16 / 18

English Operating instructions – Lawn mower with combustion engine
16
Caution
Engine oil is hazardous to the
environment
After changing the oil, take the
waste oil to a waste oil collecting
point or to a waste disposal
company.
Batteries are an environmental
hazard
Do not throw used batteries into the
household refuse. Hand over used
batteries to your dealer or to a
waste management company.
Remove the battery before
scrapping the appliance.
Note
Observe the inspection and main
-
tenance intervals in the engine
manual.
After 2 operating hours

First engine oil change.
See engine manual for
subsequent intervals.
Use oil channel or quick oil drain
(Fig. 20) (optional) to drain the
oil.
Every 25 operating hours

Lubricate all rotating and bearing
points (operating lever, height
adjustment of the cutter deck,
etc.) with several drops of light
oil.
Every 2 months

Type 2 only:
Top up battery cells with distilled
water up to 1 cm below the filling
orifice.

Inflate tyres according to the
specifications on the tyre walls. If
tyres have no specifications on
the tyre walls, inflate to a
pressure of 1.3 bar.
Every 50 operating hours
Fig. 17

Using a grease gun, lubricate
mower deck wheels via the
grease nipples on the wheel
attachments and the wheel
bearings with a multi-purpose
grease.
If required
Charge the battery:
If you are not using the unit for a
prolonged period, it is recom
-
mended to take the battery out of
the unit and charge it before
storage, as well as every 2 months
during storage, and before starting
up the unit again.
Note:
Follow the instructions in the
operating manual for your battery
charger.
Replace fuses:

Replace defective fuses only with
ones of an equal rating.
Once a season

Lubricate all rotating and bearing
points (operating lever, height
adjustment of the cutter deck,
etc.) with several drops of light
oil.

Clean the spark plug and check
the gap between the electrodes
or replace the plug. See engine
handbook.

The rear axles must be lubricated
with a special-purpose (water-
repellent) grease in a specialist
workshop.

The cutting blade must be
sharpened or replaced by a
specialist workshop.
Shutting down the unit
Caution
Damage to mower materials
Keep the appliance only in clean
and dry rooms when the engine is
cold. During prolonged storage,
e.g. in winter, ensure that the
mower is protected against rust.
At the end of the season or when
the mower will not be used for
longer than a month:

Clean the mower and grass
catcher attachment.

Wipe all metal parts with an oily
rag or spray them with oil to
protect them from rust.

Charge battery with a battery
charger.

When shutting down the
appliance for the winter, remove
the battery, charge it and store in
a dry/cool location (protected
from frost). Charge the battery
every 4–6 weeks as well as
before re-installing it.

Drain the fuel tank (out in the
open air only) and service the
engine as described in the
engine handbook.

Inflate tyres according to the
specifications on the tyre walls. If
tyres have no specifications on
the tyre walls, inflate to a
pressure of 1.3 bar.

Store the mower in a clean, dry
room.
Warranty
The warranty terms issued by our
company or importer are valid in
every country.
Faults will be repaired free of
charge within the framework of the
guarantee, provided that they have
been caused by a material defect
or manufacturing error. Should you
need to call upon the warranty,
please apply to the vendor of your
machine or to the nearest agency.
Engine
The engine manufacturer is liable
for all engine-related problems with
respect to power, power measu
-
rement, technical specifications,
warranty and service. Information
can be found in the owner’s/user
handbook supplied separately by
the engine manufacturer.