background image

Customer Support

Please do NOT return the machine to the retailer or dealer without first contacting our Customer Support Department.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of 

this machine, you can seek help from the experts. Choose from the options below:
◊  Visit us on the web at www.mtdproducts.com
◊  Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683

  See How-to Maintenance and Parts Installation Videos at 

www.mtdparts.com/KnowledgeCenter

◊ 

Write us at MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019

Thank you for purchasing a lawn tractor manufactured by MTD.  

It was carefully engineered to provide excellent performance 

when properly operated and maintained. 
Please read this entire manual prior to operating the equipment.  

It instructs you how to safely and easily set up, operate and 

maintain your machine.  Please be sure that you, and any other 

persons who will operate the machine, carefully follow the 

recommended safety practices at all times.  Failure to do so could 

result in personal injury or property damage. 
All information in this manual is relative to the most recent 

product information available at the time of printing.  Review 

this manual frequently to familiarize yourself with the machine, 

its features and operation.  Please be aware that this Operator’s 

Manual may cover a range of product specifications for various 

models. Characteristics and features discussed and/or illustrated 

in this manual may not be applicable to all models. MTD 

reserves the right to change product specifications, designs and 

equipment without notice and without incurring obligation.

If applicable, the power testing information used to establish 

the power rating of the engine equipped on this machine can be 

found at www.opei.org or the engine manufacturer’s web site.

If you have any problems or questions concerning the machine, 

phone your local authorized MTD service dealer or contact us 

directly.  MTD’s Customer Support telephone numbers, website 

address and mailing address can be found on this page. We want 

to ensure your complete satisfaction at all times.
Throughout this manual, all references to 

right

 and 

left

 side of the 

machine  are observed from the operating position
The engine manufacturer is responsible for all engine-related 

issues with regards to performance, power-rating, specifications, 

warranty and service. Please refer to the engine manufacturer’s 

Owner’s/Operator’s Manual, packed separately with your 

machine, for more information.

Thank You

Record Product Information

Before setting up and operating your new equipment, please 

locate the model plate on the equipment and record the 

information in the provided area to the right. You can locate the 

model plate by 

looking beneath the seat.

 This information will 

be necessary, should you seek technical support via our web site, 

Customer Support Department, or with a local authorized service 

dealer.

M

odel

 N

uMber

S

erial

 N

uMber

To The Owner

1

2

Safe Operation Practices ........................................ 3

Assembly & Set-Up .................................................. 9

Controls & Features ................................................12

Operation ................................................................15

Maintenance  & Adjustment .................................18

Service .................................................................... 22

Troubleshooting .................................................... 26

Replacement Parts ................................................ 27

Attachments & Accessories .................................. 28

Emission Control Statement ................................. 30

Warranty ................................................................ 32

Table of Contents

Содержание series 780

































Отзывы: