MTD OEM-190-821 Скачать руководство пользователя страница 5

 5

• Replace fuel cap securely and wipe off any spilled

fuel before starting the engine as it may cause a
fire or explosion.

• Extinguish all cigarettes, cigars, pipes and other

sources of ignition.

• Never refuel the machine indoors because fuel

vapors will accumulate in the area.

• Never store the fuel container or machine inside

where there is an open flame or spark, such as a
gas hot water heater, space heater or furnace.

• Never run a machine inside a closed area.

• To reduce fire hazard, keep the machine free of

grass, leaves or other debris build-up. Clean up oil
or fuel spillage. Allow machine to cool at least 5
minutes before storing.

• Before cleaning, repairing or inspecting, make

certain the blade and all moving parts have
stopped. Disconnect the spark plug wire, and keep
the wire away from the spark plug to prevent
accidental starting.

• Check the blade and engine mounting bolts at

frequent intervals for proper tightness. Also,
visually inspect blade for damage (e.g., excessive
wear, bent, cracked). Replace with blade which
meets original equipment specifications.

• Keep all nuts, bolts and screws tight to be sure the

equipment is in safe working condition.

• Never tamper with safety devices. Check their

proper operation regularly. Use all guards as
instructed in this manual.

• After striking a foreign object, stop the engine,

remove the wire from the spark plug and thoroughly
inspect the mower for any damage. Repair the
damage before restarting and operating the mower.

• Grass catcher components are subject to wear,

damage and deterioration, which could expose
moving parts or allow objects to be thrown. For
your safety protection, frequently check
components and replace with manufacturer’s
recommended parts when necessary.

• Mower blades are sharp and can cut. Wrap the

blade(s) or wear gloves and use extra caution
when servicing blade(s).

• Check brake operation frequently. Adjust and

service as required.

• Muffler, engine and belt guards become hot during

operation and can cause a burn. Allow to cool
down before touching.

• Do not change the engine governor settings or

overspeed the engine. Excessive engine speeds
are dangerous.

• Observe proper disposal laws and regulations.

Improper disposal of fluids and materials can harm
the environment and the ecology.

• Prior to disposal, determine the proper method to

dispose of waste from your local Environmental
Protection Agency. Recycling centers are
established to properly dispose of materials in an
environmentally safe fashion.

• Use proper containers when draining fluids. Do not

use food or beverage containers that may mislead
someone into drinking from them. Properly dispose
of the containers immediately following the draining
of fluids.

• DO NOT pour oil or other fluids into the ground,

down a drain or into a stream, pond, lake or other
body of water. Observe Environmental Protection
Agency regulations when disposing of oil, fuel,
coolant, brake fluid, filters, batteries, tires and other
harmful waste.

WARNING - YOUR RESPONSIBILITY: 

Restrict the use of this power machine to persons

who read, understand and follow the warnings and instructions in this manual and on the machine.

Figure 3  Safety labels found on your unit

D O   N OT   O P EN   T H I S

COVER UNLESS THE

ENGINE IS SHUT OFF

.

Содержание OEM-190-821













Отзывы: