Advisory MTD-144
2 of 2
1
2
3
3
3
3
3
3
3
3
Counter Weight
From 42/46” or 50”
Stationary Solid Front Axle
Shown For Reference Only
FIGURE 1
two (2) 3/8-16 Nylon Lock Flange Nuts from item # 3
(
689-00325
) Hardware Pack as shown in Figure 1. Do
Not tighten hardware at this time.
5. Install the weight brackets with counter weight to the
stationary solid front axle using the two (2) 5/16-18 x
3.25” Hex Head Cap Screws and two (2) 5/16-18 Nylon
Lock Flange Nuts from item # 3 (
689-00325
) Hardware
Pack.
6. Tighten all hardware securely from steps 4 and 5.
7. Finish following the instructions provided with the
42/46” or 50” RZT Bagger assembly.
Installation Instructions:
1. Follow the instructions provided with the 42/46” or 50”
RZT Bagger assembly.
2. Disregard the section of instructions for installing the
counter weight provided with the 42/46” or 50” RZT Bag-
ger assembly.
3. Follow steps 4 through 6 for installing the counter
weight provided in the 42/46” or 50” RZT Bagger assem-
bly while using the newly ordered LH and RH Weight
Mounting Brackets and Hardware Pack.
4. Install item #1 (
703-09197-0637
) Left Hand Weight
Mounting Bracket and item # 2 (
703-09193-0637
) Right
Hand Weight Mounting Bracket to the counter weight
from the 42/46” or 50” RZT Bagger assembly using the
two (2) 3/8-16 x 2.50” Hex Head Cap Screws and
5/16-18 x 3.25”
Hex Head
Cap Screw
5/16-18 x 3.25”
Hex Head
Cap Screw
5/16-18
Nylon Lock
Flange Nut
5/16-18
Nylon Lock
Flange Nut
3/8-16
Nylon Lock
Flange
3/8-16
Nylon Lock
Flange
3/8-16 x 2.50”
Hex Head
Cap Screw
3/8-16 x 2.50”
Hex Head
Cap Screw
Bagger Assembly
