4
SPECIFICATIONS
TANKS
Polyethylene:
Sturdy, rotational molded,
polyethylene tanks in 50, 100, 200 or 300 gallon
capacities. All tanks are rectangular except the 300
gallon tank which is round. All tanks have 10 inch
fillwells equipped with strainer baskets and splash-
guard covers. All of the tanks have gallonage markers
molded into the plastic.
Fiberglass:
Outer, white gel-coat layer, three layers
of strong fiberglass mat and an inside layer of clear-
coat for wear resistance. Fiberglass tank baffles are
built into the 300 gallon tank to control surging. The
300 gallon tank has 16'' fillwells with strainer baskets
and screw-on lids for leak resistance. The tank has a
replaceable sight tube and a calibrated gallonage
indicator.
FRAMES
Polyethylene and Fiberglass:
50 gallon
frames are constructed of eleven gauge steel. 100,
200 and 300 gallon frames are constructed of ten
gauge steel while engine and pump bases are formed
into channels from seven gauge steel and then
electric-welded to the frames to form a rigid, unitized
assembly. All frames have punched holes to accept
optional accessories.
ENGINES/PUMPS
Gas-Powered Polyethylene
50 Gallon: 4.0-HP Kawasaki, 4-cycle, air-cooled,
recoil-start engine which is directly coupled through
a gear reduction to a twin-diaphragm pump (6.0-
GPM max. or 275-psi max.)
100, 200 and 300 gallon: 5.5-HP Kawasaki, 4-cycle,
air-cooled, recoil-start, gear reduction engine which
drives a twin-diaphragm pump (9.5-GPM max. or
550-psi max.).
Gas-Powered Fiberglass
300 Gallon: 8.0-HP Kawasaki, 4- cycle, air-cooled,
recoil-start engine powers a 14.0 GPM and 550 PSI,
twin-piston, diaphragm pump through a pulley and
belt drive.
IN-LINE STRAINER
All sprayers have a suction strainer with a 30-mesh
stainless steel screen located on the inlet side of the
pump.
AGITATION
Polyethylene
50 Gallon: Bypass, triple-jet agitation. 100, 200 and
300 Gallon: Pressurized, triple-jet agitation.
Fiberglass
300 Gallon: Mechanical agitation with a full-length,
stainless steel shaft with replaceable stainless steel
paddles.
PRESSURE REGULATOR
(Gas-powered only)
Adjustable pressure regulating valve with a
glycerine-dampened pressure gauge (0-860 psi).
NET WEIGHT
(Without reel or hose.)
Polyethylene
50 Gallon: 125 lbs.
100 Gallon: 237 lbs.
200 Gallon: 336 lbs.
300 Gallon: 422 lbs.
Fiberglass
DIMENSIONS
Polyethylene
50 Gallon:
Length: 54" (Includes 6 inch bumper.)
Tank Width: 19"
Frame Width: 19-1/4"(24" with hose reel)
Height: 26", (43" with hose reel)
100 Gallon:
Length: 48", 49" to drain cap
Tank Width: 38"
Frame Width: 38"
Height (to top of tank): 34", (45" w/hose reel)
200 Gallon:
Length: 65", (66" to drain cap)
Tank Width: 39"
Frame Width: 38"
Height (to top of tank): 40", (46" w/hose reel)
300 Gallon:
Length: 88", 89" to drain cap
Tank Width: 41"
Frame Width: 38"
Height (to top of tank): 47"
Fiberglass
300 Gallon:
Length:85", (86” to drain cap)
Width: 39"
Height: 39", (46" w/ hose reel)
8 HP Engine
675 lbs.
