To Install Accessories
The three (3) included acces-
sories (mirror, hook and ma-
gnet) are all attached to the
camera in the same way as
illustrated below:
To Insert SD Card
After SD card is inserted into SD card slot successfully, an SD
card icon will appear on the monitor screen; otherwise, the ‘no
SD card’ icon will show.
NOTE: If the device fails to read the TF card due to late insertion
or some problem of the TF card, the screen displays „FORMAT
TF CARD“. If the TF card is in normal condition, press OK; other-
wise, press YES to format the TF card.
Zoom in picture
In real-time monitoring mode, press the „Zoom“ button to zoom
in (1.0X,1.5X,2.0X,2.5X,3.0X) the picture.
Mirror Image
In real-time monitoring mode, The mirror image can be adjusted
by pressing the „Zoom“ button.
Switch on Camera
normal
Mirror Upside
Down
Mirror
Mirror Upside
Down
To Connect USB Cable
Use t he provided USB cable to connect the product to any PC with a USB slot. Your computer
should automatically recognize the new hardware, which you may browse by double-clicking on the
My Computer icon on your desktop, and then navigating into the Mobile Disk directory.
1. Press and hold on the power switch for about 3 seconds to turn on the camera, the power indica-
tor will illuminate and the LCD will become viewable.
Video output
Insert video cable into the video out socket of the monitor, insert the other end of the cable into the
video in jack of any compatible TV or display device. The LCD monitor is now capable of outputting
high quality video to another display.
3. Installation
4. Operation
06
07
ENGLISH
ENGLISH
Hook the hole
Wear the rubber ring
2. When in use, the tube should easily maneuver itself into position. Do not apply excessive force.
3. The flexible tube can be bent into numerous shapes that may help you explore areas you other-
wise thought were impossible to see.
4. The accessories included with EXPLORER COMP ACT can be used to retrieve small items like
dropped rings or screws.
5. When about three minutes without operation, The screen automatically enter power saving mode.
Screensavers state automatically shut down after 2 minutes.
