MSW Propullator 13500-PRO, Руководство пользователя

Страница: 15 / 35

PROPULLATOR 13500-PRO
Max. load capacity 13500 lbs (6124 kg)
Engine 6 HP 12V
Control Cable remote control and wireless remote
control
Gearbox 3 stage epicyclic
Gear change 180° turn
Gear ratio 265:1
Break Autamtically, installed in the drum
Cable diameter and lenght 9.5 mm diameter x 26 m
Drum size Diameter 64 mm x 226 mm
Position of the screws 254 mm x 114.3 mm
6. Connect the positive pole of the red rope with the positive pole of the battery.
7. The overload protection is in the black control box. The protector will stop the
motor, in case of overload. As soon as the motor is cooled down, you can operate
again.
long
black
cable
long red cable
thin
black
cable
winch
short
black
cable
short
red cable
control box
black cable with
yellow jacket
Weight kg 0 907 2722 4536 6124
Speed Mpm* 6,8 4,2 2,8 1,8 1,2
Ampere A 50 110 160 330 380
PROPULLATOR 9500-PRO
Max. load capacity 9500 lbs (4310 kg)
Engine 5.5 HP 12V
Control Cable remote control and wireless remote
control
Gearbox 3 stage epicyclic
Gear change 180° turn
Gear ratio 218:1
Break Autamtically, installed in the drum
Cable diameter and lenght 8.3mm diameter x 28m
Drum size Diameter 64 mm x 226 mm
Position of the screws 254 mm x 114.3 mm
CARE AND MAINTENANCE
It is highly recommended to operate the winch regularly (at least once a month). It
is sufficient to unwind the steel rope 15 meters under power, then unwind next 5
meters without power and finally to wind up the the steel rope completely under
power. This process will preserve all the components of the winch in good condition,
so that you can rely on the winch whenever it is really needed. The winch should only
be repaired by specialists. Use only original spare parts.
Weight kg 0 907 1814 2722 4309
Speed Mpm* 10,8 4,88 3,63 2,98 2,2
Ampere A 78 130 190 240 350
*Mpm = Meter per minute
28 29