2.
Press the clamp on the connector [1] and screw it onto the cushion
connection [2].
3.
Unscrew the air valve.
4.
Apply intensive pressure to the hand pump.
5.
Observe how the cushion inflates.
6.
When finished, turn off the air valve, press the clamp, and unscrew the
connector.
3.3.
Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
After each cleaning, all the parts should be dried well before the unit is used
again.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Perform regular inspections of the unit checking technical fitness and any
damages.
e)
Use a soft, damp cloth for cleaning.
f)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
g)
Do not clean the unit with acidic substances, medical products, diluent, fuel,
oil or other chemicals as this may cause damage to the unit.
h)
Regularly inspect the cushions and hand pump to check for hole damage.
