UP
DOWN
HEATER
BUBBLE
FILTER
TIMER
°C
CONTROLLER OPERATION
Temperature display: press RESET on PRCD, the screen shows current temperature
Heater Button:
Press HEATER button to turn the function on/off.
Meanwhile, the filter will automatically run and test for 15s. The HEATER button is green within
15s. If there is no abnormality, the heating starts until the temperature reaches setting value. After
the current water temperature drops below the setting temperature, the heating system will restart
automatically. When the HEATER button is red, the heating system is activated. When the
HEATER button is green, the heating system is at rest as the water is at the set temperature.
Filter Button:
Press FILTER button to turn the function on/off. The light of FILTER button display
green when activated.
NOTE: Filtration cannot be turned off when Heating is activated. When the Heating function is
turned off, Filtration will be stopped after 30 seconds.
NOTE: Auto-filtration system every 4 hours.
Bubble Button:
To activate the bubbling massage function, which has a 20-minutes auto off for
10-mintues feature. The light of Bubble button displays green when activated.
Heater Button
Bubble Button
Up Button
Filter Button
Timer Button
Down Button
FILTER
HEATER
14
BUBBLE