mspa B- 131 Luxury Exotic Скачать руководство пользователя

Страница: 5 / 17

INSTRUCTIONS

NOTE: Ensure to check all parts are present.

A: Spa top zipper cover with aluminum foil inside

B-091 comes with a top lid, which is

connected to ground cloth by buckle
instead of zipper and digital lock.

B: Control panel
C: Spa pool
D: Temp barrier mat
E: Digital lock (except B-091)
F: Inﬂation hose
G: Filter cartridge
H: Drainage hose adapter
I: Repair kit
J: Manometer
K: Inﬂatable bladder
L: Wrench
NOTE: Drawings for illustration purpose only in this manual. Actual product may vary. Not to scale.

A. Site Requirements

WARNING:

The ﬂoor has to be capable of supporting the expected load of the spa tub.

WARNING:

An adequate drainage system has to be provided to deal with overﬂow water.

IMPORTANT:

It is extremely important to make sure the spa tub is placed on a structurallysound surface which will

support the weight of the spa, water, and occupants. Flat, smooth and supporting surface is required.
Uneven or unsound surfaces can damage the tub and void your warranty. Regardless, it is your
responsibility to make sure the site is properly prepared, whether on the ground, on a ﬂoor, deck,
patio or slab. Level the surface before ﬁlling spa with water.

a) Indoor Installation:
Indoor installations have special considerations, be aware of following requirements.

• Verify the supporting ﬂoor structure will accommodate the ﬁlled weight of the spa with occupants. A qualiﬁed
contractor or a structural engineer can help to determine the requirements. The ﬂoor where the spa tub is installed
must be a nonslip and ﬂat surface.
• A proper drain is essential to indoor installation. Select ﬂooring which provides a good grip for wet feet.
• Humidity is a naturally side effect of indoor spa installation. Determine the effects of airborne moisture on exposed
wood, paper and etc in the proposed location. The room should be properly ventilated to allow moisture to escape.
Installation of a bathroom fan or other venting system is a good idea to prevent excess condensation in the room.

Note:

Do not install the spa tub on a carpet or any other materials that could be damaged by moisture.

b) Outdoor Installation:
WARNING: TO AVOID THE ELECTRIC SHOCK, DO NOT USE THE SPA IN THE RAINS.

It is important to install the spa tub on a ﬁrm level surface. If the spa tub is installed outdoors, make sure there are no
sharp objects that could damage the unit. The surface must be ﬂat so the spa tub will be placed ﬁrmly and properly.
• If outdoors, make sure that the site has adequate drainage so water splashed out during ﬁlling, emptying or using
the spa will not be able to pool around the spa.
• Do not leave the spa tub exposed to direct sunshine for an extended period.

Note:
1. It is important only to use a 16A (13A for UK, 10A for Australia& New Zealand) power supply.
2. If have to use an extension cord/connecting cable, please make sure it is for 16A (13A for UK) purpose and
for outdoor use.
3. For safety reasons, set up spa tub at least a few meters away from power supply and within line of slight
of the spa for safety