MSI Z87 MPOWER MAX Скачать руководство пользователя страница 35

Страница: 35 / 118

Chapter 1

1-21

Getting Started

Boot up the computer and install the drivers and software included in your video

card package. For more information, please refer to the manual that came with

your video card.
After all of the hardware and software has been properly installed, reboot the

system. After entering the operating system (OS), right click on the desktop and

choose the “Catalyst Control Center”.

The CrossFire™ setting must be enabled to allow CrossFire™ mode to operate.

The follow screen appears in the Catalyst Control Center. Depending on your

operating system, the screen may look different.

Important

A CrossFire

system has four possible display modes:

SuperTiling
Scissor Mode
Alternate Frame Rendering
Super Anti-aliasing.

For more details, please consult the graphics card manual.

•
•
•
•

Содержание Z87 MPOWER MAX























































































































Результаты поиска

Содержание Z87 MPOWER MAX

Отзывы:

MSI Z87 MPOWER MAX, Инструкция по эксплуатации, Страница: 35 / 118

Результаты поиска

Содержание Z87 MPOWER MAX

Отзывы: