2-22
Hardware Setup
▍
MS-S0101
Hardware Setup
▍
MS-S0101
BIOS Recovery Jumper: J_BOOT8
Users can short connect pn#2-3 to recover the system BIOS. When the system
s done wth the job, the buzzer wll beep to remnd users to set the jumper to ts
normal state (pn#1-2 short connected).
Recovery
1
Normal
1
J_BOOT8
1
CF Mode Selecting Jumper: JCF_SEL1
Ths jumper s used to select Master/Slave mode of the CF devce.
JCF_SEL1
Master
Slave
1
1
1
CF Voltage Selecting Jumper: JCFV_SEL1
Ths jumper s used to select the operatng voltage of the CF devce.
JCFV_SEL1
VCC3
VCC5
1
1
1
