manualshive.com logo in svg

MSI MS-9A59, Руководство пользователя, Страница: 56 / 64

Поделиться
Скачать
MSI MS-9A59 Скачать руководство пользователя страница 56

3-18

 

▍

BIOS Setup

Chipset

 

▶

DVMT Pre-Allocated

This setting defines the DVMT pre-allocated memory. Pre-allocated memory is 

the small amount of system memory made available at boot time by the system 

BIOS for video. Pre-allocated memory is also known as locked memory. This is 

because it is "locked" for video use only and as such, is invisible and unable to be 

used by the operating system. 

 

▶

DVMT Total Gfx Mem

This setting specifies the memory size for DVMT.

 

▶

LCD Panel Type

This setting allows you to set the resolution of the LCD display.

 

▶

LCD Backlight Level

This setting allows you to set the LCD backlight level.

 

▶

PlayReady 3 (for Windows 10 only)

This setting enables/disables Microsoft’s PlayReady 3 technology. PlayReady 

is a content protection technology from Microsoft that includes encryption, out-

put protection and Digital Rights Management (DRM). Window’s PlayReady 3.0 

DRM can support 4K content but use more restrictive digital rights managemen 

technology to curb illegitimate streams at the same time.

Содержание MS-9A59

































































Отзывы:

Нет отзывов